Pair of stylish Kappa soft panniers, perfect for V7 and V9 models.

• 550D Polyester construction with PVC coating
• 2mm thick synthetic leather (PU) detailing
• 190D Nylon inner lining material
• 14 litre capacity for each bag
• Product complies with Reach regulations
• Roll-top closure system
• Saddlebag straps with hook and loop fastening closure
• Front handle
• Waterproof removable inner lining with thermo-sealed seams
• Strap with ring loop to fasten to double D-ring
• Front waterproof zip
• KAPPA RAMBLER logo printed on patch
• Bags come with a TNT bag with the KAPPA RAMBLER logo for storage

 Order now and we will post your order within 7 days.

Black 55 litre Junior top box / top case to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Black 40 litre Junior top box / top case to to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. This case will take a single helmet

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

These are a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This will latch to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Black 55 litre Junior top box / top case to match Hepco and Becker Junior Flash panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets

• Silver painted covers can be removed for colour matching to your bike
• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

This kit consists of a pair of complete panniers with lids and latches finished in black with pinstripes. Supplied with a pair of keys

Perfect for finishing off that T3 Cali restoration. These are a bolt on pannier, you will need to mark and drill these to suit your pannier frames. See FRA18540 for matching chrome frames and LUA14002 for replacement locks and hinges.

As with the original panniers these will not open fully on models fitted with the full T3 Cali seat and handrail. We recommend spacing the panniers out on 20-25mm rubber spacers when fitting to the pannier frame, this will allow the lids to open as far as possible. Alternatively you could remove the hinges and fit lock LUA14002 in their place.

 This part is available by special order, request a quote

 18482550 GU18482550 18 48 25 50
 1848 2550 1848.2550 18.48.25.50

Pair of chromed Hepco and Becker pannier rails for Hepco and Becker panniers

Pair pannier racks for frame numbers post 17500

 This part is available by special order, request a quote

Pair of chromed Hepco and Becker pannier rails for Hepco and Becker panniers

Pair pannier racks for frame numbers up to 17500

 This part is available by special order, request a quote

Tough Xplorer top box / top case to match Hepco and Becker Xplorer panniers, ideal for enduro touring. Extremely endurable combination of aluminium sheet and coloured shock-resistant plastic.

• Completely waterproof thanks to special seals
• Made of 1.5 mm thick plate aluminum and highly
impact-resistant plastic molding
• Absorbs impacts and ground contact
• Stable metal locks, integrated carrying handles
• Case and top case available with simultaneous
locking (please specify when ordering)
• Takes a full-face helmet
• Innovative side hinged design
• Fits all H&B rear racks and aluminum racks

 This part is available by special order, request a quote

Tough Xplorer top box / top case to match Hepco and Becker Xplorer panniers, ideal for enduro touring. Extremely endurable combination of black anodised aluminium sheet and coloured shock-resistant plastic.

• Completely waterproof thanks to special seals
• Made of 1.5 mm thick plate aluminum and highly
impact-resistant plastic molding
• Absorbs impacts and ground contact
• Stable metal locks, integrated carrying handles
• Case and top case available with simultaneous
locking (please specify when ordering)
• Takes a full-face helmet
• Innovative side hinged design
• Fits all H&B rear racks and aluminum racks

 This part is available by special order, request a quote

Complete chromed Hepco and Becker rear luggage rack and pannier rails for Hepco and Becker panniers

To fit these frames, you may need to lower the tail light so this does not foul the rack. You may also need to drill the mudguard if you are to use the brace for the pannier frames. Pillion pegs may need moving forward slightly to accomodate panniers.

 This part is available by special order, request a quote